Guangzhou Guomat Air Spring Co., Ltd.
Email:vivi@662n.com Mob:+86-18998374939(WhatsAPP) Wechat:airspring-guomat Skype:guomat
Add to Cart
Industrial Airbags Double Convoluted Aftermarket Air Springs For SAF Holland 57007180
Cross Reference
Airspring Supplier: Goodyear
Reference: 578923309; 578 92 3 309; 578-92-3-309
Competitor/Supplier Number: 2B12-425; 2B12 425; 2B12425; 2B12 311; 2B12 311; 2B12311
Airspring Supplier: Contitech
Competitor/Supplier Number: FD 33022363; FD 330-22 363; FD 330 22 363
Airspring Supplier: Triangle
Reference: 6316
Competitor/Supplier Number: 4363
Suspension Supplier: Kwiklok/Todco(Jifflox)
Airspring Supplier: Vibracoustic
Competitor/Supplier Number: VSP2B22R7180
Suspension Supplier: EI Ride
Competitor/Supplier Number: 8030190
Suspension Supplier: Hendrickson
Competitor/Supplier Number: 1VA1816
Suspension Supplier: Leland
Competitor/Supplier Number: SC2075
Suspension Supplier: Navistar
Competitor/Supplier Number: 1685179C1
Suspension Supplier: SAF Holland
Competitor/Supplier Number: 57007180
Suspension Supplier: Peerless
Competitor/Supplier Number: 0550 00001
Suspension Supplier: Ridewell
Competitor/Supplier Number: 1003587180C
Suspension Supplier :Watson&Chalinl
Competitor/Supplier Number: AS01541 G/01881F
Firestone Trimmed: W01-358-7180; W01 358 7180; W013587180; WO13587180; WO1 358 7180; WO1-358-7180; w01-358-7180; w01 358 7180; w03587180; FIRESTONE FLEX 22
| The detailed Specifications and parameters | |
| Blind Nut/Screw teeth | Air inlet/Air hole/Air fittings |
| Screw teeth of the top plate: 2×3/8UNC | 1/4NPTF |
| Screw teeth of the bottom plate: 2×3/8UNC | The distance between the screw center and the air inlet:73mm |
| The screw center distance: 157mm | |
| Cover plate | Height |
| Top cover plate:231mm | Min. height: 81mm |
| Bottom cover plate:231mm | Max. height: 305mm |
| Rubber Max. OD: 325mm | |
| Bumper block | Girdle ring/Girdle hoop/belt loop |
| Without | one piece of belt loop/girdle hoop/girdle ring |
Advantages and characteristics of rubber air springs
Plastic selection of the relative height, bearing capacity and stiffness coefficient of the torsion spring: When using, the relative height, bearing capacity and stiffness coefficient of the torsion spring can be selected individually and widely, and the soft torsion spring characteristics can be obtained.
Relative height of torsion spring: Applying a pressure regulating valve of relative height, the relative height of the rubber air spring can be operated moderately according to the application regulations, and maintain a certain relative height when the spring load changes.
Bearing capacity: For rubber air springs of the same specification, changing the gas pressure can obtain different bearing capacities. The bearing capacity is probably positively related to the gas pressure. This achieves the same application of a variety of load specifications.
Stiffness coefficient: When designing the bending stiffness, it can be selected by changing the gas pressure of the torsion spring. The bending stiffness is approximately positively related to the gas pressure. Therefore, the bending stiffness can be selected to be very low. For a specification, the bending stiffness is Adjustable, it changes with the change of load, so the natural frequency does not change basically under any load, so it can make the supported system have basically unchanged characteristics.
The reated picture of air springs/convoluted air spring/air bag/air balloon
