Double Convoluted Rubber Air Spring Bellows Goodyear Airlift Bag Replacement 556 2 3 8077

Goodyear Airlift Bag Replacement 556 2 3 8077 Double Convoluted Rubber Air Springs Bellows


Basic Info.

Product name: Air spring, air bag, air shocks, air balloon, air suspension spring, pneumatic cushion, rubber bellow
Sample: Available
Condition: 100% Tested
Material: Rubber
HS code: 8708809000
Quality: High-quality
Warranty: 1 year
Delivery time: 3-8 Working days
Payment ways: T/T, Western Union, Paypal or Others
Shipping way: By express, by air, by sea or others
Ship from: Guangzhou, Guangdong, China
Ship to: All over the world

Cross Reference

Goodyear number: 556 2 3 8077

Goodyear number: 556238077

Goodyear number: 556-2-3-8077

Specifications and Technical Parameters

Air spring components

Air fitting: A tapped hole allowing for the spring to be fed from the air compressor
Nut/bolt/mount: The method for attaching the air spring to the component. Some air springs incorporate a bolt and air fitting combination device.
Bead plate: Crimped metal plate enclosing the spring and allowing attachment. This is typically forged steel, cast zinc alloy or cast aluminum.
Bellows: The physical, multi-layer material withholding the compressed gas. Usually made of neoprene or rubber.
Girdle: Only found in air springs of convoluted design, separating the bellows chambers.
Bumper: An optional layer of padding protecting the piston from damage if the air spring fails.

Characteristics of rubber air spring

Low natural frequency;
low stiffness;
good damping;
Height adjustable.
When the air spring is in use, it must be equipped with an air source to ensure the stability of its internal pressure.

Production Process

1. Rubber mixing
2. Cord calendering

The calendering process is the process of using a calender to cover the surface of the textile with the compounded rubber material and penetrate into the gaps in the fabric, so that the rubber material and the textile are closely combined to form a rubber cord.
3. Film calendering

The film required for air spring production is generally rolled by a three-roller calender. The heat-smelted rubber is pressed into a thin sheet with a certain thickness by three rolls, and rolled into a roll after being cooled by the conveyor belt. The width of the film is generally on the roller. The width of the cutting edge is fixed, and the edge is no longer cut when forming.
4. Rubber cord cutting

It is to cut the rubber cord fabric into single pieces according to a certain angle and width, and then curl the joints into rolls for molding. There are two ways to joint the curtain, one is the automatic joint of the joint machine, and the other is the manual joint.
5. Air spring forming
The process of combining rubber parts and other parts into semi-finished products according to design requirements on special equipment and forming drums.