Guangzhou Guomat Air Spring Co., Ltd.
Email:vivi@662n.com Mob:+86-18998374939(WhatsAPP) Wechat:airspring-guomat Skype:guomat
Add to Cart
3 Convolutions F-100-3 Punch Lift Cushion Replaces Rubber Yokohama Air Spring S-100-3R/S100-3
OEM Cross reference
AIRSUSTECH Part No.: F-100-3
YOKOHAMA S-100-3R
YOKOHAMA S 100 3R
YOKOHAMA S-100-3
YOKOHAMA S 100 3
YOKOHAMA S100-3
YOKOHAMA S 100 3
YOKOHAMA S100-3R
Replaces these air springs
Specifications and Detailed Technical Parameters: F-100-3
Design Height: 152mm
Max. Height: 222mm
Min Height: 87mm
Maximum stroke(mm): ±45
Max diameter(mm) :160
Standard Height,Internal Pressure 0.49 M pa When The General Value
Effective Area (Cm2): 79
Volume(L): 1.4
Load (KN):3.9
Dynamic Spring Parameters (N/mm): 78
Natural Frequency (Hz): 2.2
Max inner preesure limited (Mpa): 0.88
Burst inner pressure (Mpa): 2.9-3.9
Other types of yokohama air suspension spring S-100 series we could offer
| Guomat No | Yokohama No. | Height | Maximum stroke(mm) | Max diameter(mm) | Standard height(mm)(Pressure 0.49Mpa) | Max inner preesure limited (Mpa) | ||||||
| Design Height(mm) | Max. Heigh(mm)t | Min Height(mm) | Effective Area (cm2) | Volume(L) | Load (KN) | Dynamic Spring Parameters (N/mm) | Natural Frequency (Hz) | |||||
| F-100-4 | S-100-4R | 206 | 296 | 121 | ±60 | 160 | 79 | 1.95 | 3.9 | 59 | 1.9 | 0.88 |
| F-100-2 | S-100-2R | 98 | 143 | 58 | ±30 | 160 | 79 | 0.85 | 3.9 | 118 | 2.7 | 0.88 |
What should we pay attention to when using th punch lift cushion
Equipment such as punch presses are very common. They are equipment for producing some molds or some parts. It is precisely because the utilization rate of this equipment is very high, so the service life of the equipment should also be concerned, and an important factor affecting the life of the punch press The component is the air spring. A good punch air bag can greatly improve the service life of punch equipment.
Therefore, when we use the punch air spring, we must first pay attention to its buffering effect. It must meet the application regulations of the punch, and there should be no air leakage. It can be used for a longer time to ensure that it can provide a good punch to the punch. Protective effects. The second is to pay attention to whether it can be replaced in time. If the air spring reaches the service life, it should be replaced in time to avoid the deformation of the punch press or the failure of the function of the punch press if the air spring can no longer function.
The related picture of F-100-3
