Guangzhou Guomat Air Spring Co., Ltd.
Email:vivi@662n.com Mob:+86-18998374939(WhatsAPP) Wechat:airspring-guomat Skype:guomat
Add to Cart
Double Convoluted 251mm Max. OD Brake & Wheel M3501 Suspension Air Springs
Cross Reference
Taurus KF218-6910
Taurus KF218 6910
Taurus KF2186910
Firestone W01-358-6910
Firestone W01 358 6910
Firestone W013586910
Firestone WO1-358-6910
Firestone WO1 358 6910
Firestone WO13586910
Contitech FD 200-19 320
Contitech FD 200 19 320
Contitech FD 200-19320
Goodyear 2B9-200;2B9 200
Goodyear 2B9-202; 2B9 202
Goodyear 2B9-216; 2B9 216
Goodyear 578423202
Triangle 6325
Triangle 4320
OEM Reference
Brake&Wheel M3501
Dina A812719
Dina AZ812719
Dayton 3546910
Leland Sc2011
Navistar 554783C1
Hendrickson S8768/458433
Ridewell 1003586910C
SAF Holland 57006910
Trailers De 133128
Tuthill 1371
Watson&Chalin AS-0001
Watson&Chalin AS-0156G
2B6910 Specifications and Tecnical Parameters
Blind Nut
Nut/blind nut Top plate screw (nut) teeth: 2 x 3/8-16UNC
Top plate screw center distance: 89 mm
Bottom cover plate screw (nut) teeth: 2 x 3/8-16UNC
Bottom plate screw center distance : 89 mm
Air hole/air inlet/air fitting air hole/air inlet
1/4NPTF
The distance between the air hole and the screw center: 44.5mm
Cover plate
Top plate diameter (width): 160 mm
Bottom cover diameter (width): 160 mm
Rubber Bellows
Rubber bellows natural diameter: 224 mm
Rubber bellows Max. diameter: 251mm
Height
Min. height: 75mm
Max. height: 260mm
Working Stroke: 185mm
Space required: 265mm
Bumper block/bumper block
Without bumper
Belt loop/Girdle hoop/Girdle ring
One piece of belt loop/girdle hoop/girdle ring
Min. pressure: 0 bar
Return force to min.height: ≤200N
Overall weight with clamped plates: 3.2kg
Vibration isolation - dynamic characteristic values
Design Height H: recommended 220mm, minimum 205mm
| Pressure p[bar] | 3 | 4 | 5 | 6 | 7 | 8 | Vol. V[l] |
| Force(Load) [KN] | 6.1 | 8.2 | 10.3 | 12.5 | 14.5 | 16.5 | 6.0 |
| Spring rate [N/cm] | 750 | 960 | 1110 | 1340 | 1510 | 1730 | |
| Natural frequency [Hz] | 1.8 | 1.7 | 1.7 | 1.6 | 1.6 | 1.6 |
Pneumatic application-static characteristic values
Force F[KN]
| Pressure p [bar] | 3 | 4 | 5 | 6 | 7 | 8 | Vol. V [l] | |
| Height H[mm] | 250 | 4.9 | 6.6 | 8.2 | 9.5 | 11.7 | 13.4 | 6.5 |
| 210 | 6.7 | 8.8 | 11.0 | 13.3 | 15.5 | 17.6 | 5.8 | |
| 170 | 7.9 | 10.5 | 13.1 | 15.7 | 18.3 | 20.7 | 4.9 | |
| 130 | 9.1 | 12.0 | 15.0 | 17.8 | 20.7 | 23.4 | 4.0 | |
| 90 | 9.9 | 13.2 | 16.6 | 19.8 | 23.0 | 25.8 | 2.9 | |
The rubber air spring protects the embryo, resists various external air pollution and airtightness, has a high-toughness frame layer, acts as a control support force, bears the load working pressure, compresses the air in the airtight air chamber, and bears the standard air pressure. . When working, the inner wall of the compressed air column is filled with air. With the increase of the vibration load, the relative height of the torsion spring decreases, the inner wall capacity decreases, the bending stiffness of the torsion spring increases, and the total bearing area of the inner wall air column increases, and the bearing capacity of the torsion spring increases. The opposite is true when the amount of vibration load decreases.
The picture
